Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
27.95
This 950 ml graded milk pitcher is the ideal size to foam milk from a latte or cappuccino. This is ideal size for Coffee Shop and useful for high volume use. The narrow shape of the spout of this pitcher is essential to the success of your latte arts.
Height: 4.80 "in. / 12.5cm
Spout: 4 in. / 11 cm
Base: 3.9"in. / 10 cm
Volume: 32oz / 950 mL
Recommended thermometer length: 7"
Stainless steel, commercial quality.
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
22.95
Every cappuccino is made with passion! For the cappuccino and macchiato enthusiast who realizes a beverage at a time, the narrow shape of the pouring spout of this pitcher is essential to the success of its lattes arts. Measurements etched right into the interior of both sides of the pitcher. The scale is engraved in both ounces and milliliters to reduce preparation work when pouring milk and reduce waste.
The 20 oz Rhino Coffee Gear Graded Milk Pitchers are thick - 1mm and made with food grade stainless steel provides better stretch time for texturing milk.
The heavier weight lends to its durability and professional feel.
The narrow shape of the pouring spout of this pitcher is essential to the success of your lattes arts.
The handle has been ergonomically designed for the busy barista.
A nice drawing of fact not faith of the quality of a coffee, but confessed that it is charming!
More technical information
- Height: 4.40 ". / 11 cm
- Spout: 3.74 ". / 9,5 cm
- Base: 3,5 ". / 8,7 cm
Recommended thermometer length: 5".
Stainless steel, commercial quality.
Inquiry for international shipping rate
Contact us for an estimate. We can provide affordable shipment by air flight.
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
26.95
You cannot survive without your latte? This pitcher is the ideal size for foaming milk from a latte or a small cappuccino. The narrow shape of the pouring spout of this pitcher is essential to the success of your lattes arts. Show off your barista skills and marvel your customers or friends with latte cafes decorated just for them!
Height: 4.5 "in. / 11cm
Spout: 3.74 in. / 9.5 cm
Base: 3.54 "in. / 9 cm
Volume: 20oz / 600 mL
Recommended thermometer length: 5"
Stainless steel, commercial quality.
Inquiry for international shipping rate
Contact us for an estimate. We can provide affordable shipment by air flight.
Vendor: Rhino Coffee Gear
Type: Outils Barista
Price:
24.95
The Rhino Accutemp Stick-on Thermometer is the state of the art liquid crystal indicators turn from green to black as you steam to indicate that the temperature is acheived. Accutemp is lightning fast and never in your way while doing a steam milk.
Features
- Dishwasher safe (recommended below 80 degrees water to preserve life and accuracy)
- Simple clean with warm soapy water and a soft cloth
Vendor: Melodrip
Type: Outils Barista
Price:
49.35
Product details and specifications
Melodrip is a new approch to brewing coffee derived from thousands of hours of research and feedback from the most discriminating coffee brewers in the specialty coffee space and benefits continue to be explored by hundreds every day.
Stepping up the game of brewing with bare kettle, Melodrip enhance control to maximize the potential of your kettle and brewing devices to add more clarity and focus to every nuance of your coffee drinking experience.
Melodrip controls the suspension of particles while you're brewing. By doing so, you can minimize the effects of fines impacting the filtration of your filter paper as well as the volume of micro-particles or fines flowing out through your filter (Particle Discharge).
- Handle : machined 304 stainless steel/knurled for optimal handling/bent to maximise visual clearance
- Melodrip Dish : Eastman Tritan TX1001 copolyester, certified to NSF/ANSI Standard 51 for Food Equipment Materials, certified NSF/ANSI Standard 61 - Drinking Water System Component-Health Effects
- Stick : Borosilicate Glass Stirring Stick, 6mm x 150 mm
| Parts | Weight |
| Handle | 38.2 g |
| Dish | 11.8 g |
| Stick | 10.7 g |
Vendor: Kayé
Type: Outils Barista
Price:
11.00
This coffees pocket notebook is made with 100% FSC certified ecological paper and provides an easy way to quickly record coffee tasting notes in a small, convenient journal format. Perfect for coffee lovers, coffee geeks, barista and other fans of the roaster's art.
This coffee notebook allows you to summarize, evaluate and comment on your coffee tastings.
Format :
- 3,5 in. X 5.5 in. (Passport size) - rounded corners
- 36 pages
Made in Montréal
Inquiry for international shipping rate
Contact us for an estimate. We can provide affordable shipment by air flight.
Vendor: Rhino Coffee Gear
Type: Outils Barista
Price:
7.95
If you are cupping regularly or running cupping sessions then you will understand how important it is to have a good quality cupping spoon. It's not just the finish, weight and feel, it's also having good curvature and depth to permit effecting skimming from the top of the cup.
- The Rhino Coffee Gear cupping spoon is a high quality 304 food grade stainless steel cupping soon.
- Stainless steel tends to resist scratching meaning it will last longer without taste contamination and is a lot more durable.
- The perfect shape, balance and dimensions for cupping coffee.
- Pairs perfectly with the Rhino Coffee Gear Cupping Bowl.
Vendor: Rhino Coffee Gear
Type: Outils Barista
Price:
8.95
Intended for coffee roasters, green bean buyers, and baristas, Rhino Coffee Gear Cupping bowl let you identify the characteristics of the coffee; the aromas, the body, and the intensity of flavors (acidity) and help you focus less on the color and clarity of the roast and focus more on the flavour and aroma.
Features:
- Cupping bowl that has black on the inside of the cup as opposed to the normal white
- Meets requirements for SCAA Volume Standards
- High quality ceramic, which retains heat
- 88 mm internal diametre (3.46")
- 220ml Capacity (7.43 fl oz)
- Curved internal base
- Pairs perfectly with the professional Rhino Coffee Gear Cupping Spoon
]]>
Vendor: Comandante
Type: Préparation manuelle
Price:
345.00
The best manual grain grinder ever. Robustness and high precision characterize the Comandante C-40 Nitro Blade. The refined geometry and structure of the head allow to achieve the best performances that are for those who look for a perfect particle distribution of the coffee beans.
- Axle and crank is made of Stainless Steel
- Crank-Knob 100% is made of Natural-based Oak Wood
- Wood Surface Treatment : Natural-based Wax-Oil
- Engine-Frame: Eastman Tritan (BPA-free)
- Axle Bearings: 2 Stainless Steel Micro Ball Bearing with Rubber Seals
- Jar is in Glass
- Lid is Urochem 371 (natural-based)
- Handcrafted in Germany
| Weight Chart | lb | oz | gr |
| Grinder weight | 1.63 | 26 |
740 |
Vendor: Rhino Coffee Gear
Type: Outils Barista
Price:
9.95
Indispensable to tame the milk froth as a real barista.
The thermometer indicates each degree (Fahrenheit and Celsius). Excellent training aid or daily use to succeed in pretty latte art.
You see the little red bar at 150 degrees? It will help prevent overheating. The red and green areas mean that the milk is at the right temperature (green zone). Two calibration points; hot and cold allow you to adjust your thermometer using a nut located under the thermometer head.
Included the clip for more stability in the milk pitcher.
Still wondering if it's the best thermometer, YES!
Features:
5 inches (13 cm)
7 inches (18 cm)
Vendor: Rhino Coffee Gear
Type: Outils Barista
Price:
9.95
A metal filter holder on the surface of your countertop can leave a mark very difficult to remove. Use a rubber mat and focus on your work as a barista! The protective rubber mat is the essential accessory to work your coffee without fear of damaging your work surface.
The Rhino Coffee Gear Classic Bench Tamper Mat is made from durable food grade silicone rubber. Designed to protect both the bench and portafilter, with its compact size it will fit into even the smallest work spaces. Pratical size of 4 in. x 6 in. 160mm (L) x 110mm (W)
Inquiry for international shipping rate
Contact us for an estimate. We can provide affordable shipment by air flight.
Vendor: Rattleware
Type: Entretien
Price:
3.99
Protect your fingers from a hot steaming wand.
Dimensions : 2" x 5"
]]>
Vendor: Cafelat
Type: Outils Barista
Price:
47.25
- Matière: acier inoxydable et caoutchouc / nylon
- Hauteur incl. la base: 6,5 cm (H) x 9.5cm (W) x 10.5cm (L)
- Poids du produit: 380g
Vendor: Rattleware
Type: Presse café
Price:
49.95
53mm tamper with stainless steel base. Shockproof ABS plastic handle. Suitable size for espresso machine holders with a 53mm filter holder. This tamper is usually the format to use if you have a Saeco non-pressurized filter holder.
- Diameter of the handle at its widest: 1.75 inches
- Height of the handle: 2.75 inches
- Height: 3 inches
]]>
Vendor: Puly
Type: Entretien
Price:
23.95
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
23.95
This 950 ml milk pitcher is the ideal size to foam milk from a latte or cappuccino. This is ideal size for Coffee Shop and useful for high volume use. The narrow shape of the spout of this pitcher is essential to the success of your latte arts.
Height: 4.72 "in. / 12cm
Spout: 3.94 in. / 10.5 cm
Base: 3.93 "in. / 10 cm
Volume: 32oz / 950 mL
Recommended thermometer length: 7"
Stainless steel, commercial quality.
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
12.96
Every cappuccino is made with passion! For the cappuccino and macchiato enthusiast who realizes a beverage at a time, the narrow shape of the pouring spout of this pitcher is essential to the success of its lattes arts. Measurements etched right into the interior of both sides of the pitcher. The scale is engraved in both ounces and milliliters to reduce preparation work when pouring milk and reduce waste.
The 12 oz Rhino Coffee Gear Classic Milk Pitchers is made with food grade stainless steel provides better stretch time for texturing milk.
The spout designed for optimum control in pouring latte art.
The handle has been ergonomically designed for the busy barista.
A nice drawing of fact not faith of the quality of a coffee, but confessed that it is charming!
More technical information
- Height: 3.55 ". / 9.5 cm
- Spout: 3.15 ". / 8 cm
- Base: 2.76 ". / 7.5 cm
Recommended thermometer length: 5".
Stainless steel, commercial quality.
]]>
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
26.95
You cannot survive without your latte? This pitcher is the ideal size for foaming milk from a latte or a small cappuccino. The narrow shape of the pouring spout of this pitcher is essential to the success of your lattes arts. Show off your barista skills and marvel your customers or friends with latte cafes decorated just for them!
- Height: 4.5 "in. / 11cm
- Spout: 3.74 in. / 9.5 cm
- Base: 3.54 "in. / 9 cm
- Volume: 20oz / 600 mL
- Recommended thermometer length: 5"
- Stainless steel, commercial quality.
]]>
Vendor: Rhino Coffee Gear
Type: Pichets à lait
Price:
19.95
Every cappuccino is made with passion! For the cappuccino and macchiato enthusiast who realizes a beverage at a time, the narrow shape of the pouring spout of this pitcher is essential to the success of its lattes arts. Measurements etched right into the interior of both sides of the pitcher. The scale is engraved in both ounces and milliliters to reduce preparation work when pouring milk and reduce waste.
The 12 oz Rhino Coffee Gear Graded Milk Pitchers are thick - 1mm and made with food grade stainless steel provides better stretch time for texturing milk.
The heavier weight lends to its durability and professional feel.
The narrow shape of the pouring spout of this pitcher is essential to the success of your lattes arts.
The handle has been ergonomically designed for the busy barista.
A nice drawing of fact not faith of the quality of a coffee, but confessed that it is charming!
More technical information
- Height: 3.55 ". / 9.5 cm
- Spout: 3.15 ". / 8 cm
- Base: 2.76 ". / 7.5 cm
Recommended thermometer length: 5".
Stainless steel, commercial quality.
Inquiry for international shipping rate
Contact us for an estimate. We can provide affordable shipment by air flight.
Vendor: Milan
Type: Tabliers
Price:
69.95
- Washable leather and flame retardant fabric
- Mobile and pen pocket
- Front pockets
- Fabric bag for storage
- Leather and fabric: 12 oz, 100% cotton and natural leather
- Size: 25 x 31 inches
]]>
Vendor: Rattleware
Type: Outils Barista
Price:
94.95
The Rattleware Knock boxe is made from heavy duty stainless steel featuring a welded metal bar for strong sides. Replaceable rubber bar cover and an edge gasket made of molded rubber. Designed for commercial use. The holder has an open bottom with non-scratch rubber feet to avoid slipping on the counter.
Replacement rubber bar covers sold separately.
Measures: 9.25" x 5.5" x 4". (10.25" x 6.5" on top with the gasket)
]]>
Vendor: Rattleware
Type: Outils Barista
Price:
89.95
Replacement rubber bar covers sold separately. Knock box set measures 6" X 5.5" X 4" ]]>
Vendor: Rattleware
Type: Outils Barista
Price:
59.95
Made of heavy duty stainless steel with a welded metal bar for strong sides and replaceable rubber bar cover with an edge gasket made of molded rubber. Designed for commercial use. Replacement rubber covers can be sold separately. No holder included that also can be sold separately.
Knock box measures 6 x 5.5 x 4 inches.
]]>